Pallet of 36 pcs. AIKO 650W Bifacial Silver Frame photovoltaic panel

The subject of the sale is a full palette of 36 AIKO photovoltaic modules with a power of 650 W each, made using N-Type ABC technology, in a bifacial version with a dual-glass structure.

Model from the product card: AIKO-A650-GRH66Dw.

Total pallet power: 23.40 kWp.

The modules belong to the AIKO Stellar 1N+66 series. The use of N-Type ABC cells, glass-glass construction and double-sided bifacial technology allows for very high efficiency, high output power and additional energy yield from the back of the modules. The panels have been designed for commercial and industrial installations and photovoltaic farms, where high efficiency, durability and low cost of balancing the system are important.

⸻

The most important features of the product

• Full pallet: 36 modules
• Power of one module: 650W
• Total pallet power: 23.40 kWp
• Model AIKO-A650-GRH66Dw
• AIKO Stellar 1N+66 series
• N-Type ABC technology
• Double-sided bifacial modules
• Dual-glass construction – glass on glass
• 132 cells in a 6 × 22 arrangement
• Module efficiency 24.1%
• Two-sided factor 75 ±5%
• Possible additional energy yield from the rear side of the module
• Higher power from the same surface area
• Partial shading optimization
• More favorable temperature coefficient
• Limitation of high operating temperatures
• Resistance to microcracks
• Lower cost of balancing the BOS system
• More aesthetic values
• IP68 junction box with 3 bypass diodes
• Connectors compatible with MC4 / MC4-EVO2A
• 15 years product warranty
• 30 years linear performance warranty

⸻

Technical specifications of one module

• Producer: AIKO
• Model: AIKO-A650-GRH66Dw
• Series: Stellar 1N+66
• Maximum power: 650 W
• Cell type: N-Type ABC
• Module type: bifacial dual-glass
• Two-sided ratio: 75 ±5%
• Number of cells: 132 pieces
• Cell arrangement: 6 × 22
• Glass: double glass, semi-tempered coated glass 2.0+2.0mm
• Frame: anodized aluminum
• Junction box: IP68, 3 bypass diodes
• Connector: MC4 / MC4-EVO2A compatible
• Cable: 4 mm² IEC / 12 AWG UL, +400 mm / -200 mm or ±1400 mm, length adapted to requirements

⸻

Dimensions and weight

• Dimensions of one module: 2382 × 1134 × 30 mm
• Weight of one module: 32.5 kg ±3%
• Number of modules on the pallet: 36 pieces
• Estimated weight of the modules only: approximately 1170 kg, excluding the weight of the pallet and packaging

⸻

Pallet data

• Number of modules on the pallet: 36 pieces
• Power of one module: 650 W
• Total pallet power: 23,400 W / 23.40 kWp
• The product is factory-packed and secured for transport

⸻

STC electrical parameters of one module

• Maximum power Pmax: 650 W
• Open-circuit voltage Voc: 49.70 V
• Operating voltage Vmp: 40.68 V
• Short-circuit current Isc: 16.64 A
• Operating current Imp: 15.98 A
• Module efficiency: 24.1%
• Power tolerance: 0 to +3%

⸻

NOCT electrical parameters of one module

• Maximum power Pmax: 495 W
• Open-circuit voltage Voc: 47.52 V
• Operating voltage Vmp: 38.98 V
• Short-circuit current Isc: 13.42 A
• Operating current Imp: 12.69 A

⸻

Operating and assembly parameters

• Operating temperature range: -40°C to +70°C
• Maximum system voltage: DC 1500 V
• Maximum nominal fuse current for series connection: 30 A
• Protection class: Class II
• Voc and Isc Tolerance: ±3%
• Fire resistance: IEC class A

⸻

Mechanical resistance

• Maximum static load on the front: 5400 Pa
• Maximum static load from the bottom: 2400 Pa
• Hail resistance: 25 mm diameter hail falling at a speed of 23 m/s

⸻

STC temperature coefficients

• Temperature coefficient Isc: +0.05%/°C
• Temperature coefficient Voc: -0.22%/°C
• Temperature coefficient Pmax: -0.26%/°C

⸻

Warranty and degradation

• 15 years product warranty
• 30 years linear performance warranty
• Efficiency loss in the first year of use: ≤1%
• Annual efficiency loss in years 2–30: ≤0.35%
• Guaranteed efficiency after 30 years: 88.85%

⸻

Additional information about technology

AIKO Stellar 1N+66 modules use N-Type ABC technology, which allows for high efficiency and high module power while maintaining high reliability. The bifacial dual-glass structure enables additional energy production from the back of the modules, especially in installations on light surfaces, ground structures and photovoltaic farms.

The modules have been designed to reduce losses in partial shading, better temperature operation and increased resistance to microcracks. Thanks to high power and efficiency, they help reduce the cost of balancing the BOS system.

⸻

Additional information about the manufacturer

AIKO is a manufacturer of photovoltaic modules specializing in modern high-efficiency cell technologies. The Stellar series was designed for large photovoltaic installations, high energy production and reliable operation for many years.

⸻